Premium Stainless Steel Beater - for Kitchenaid Tilt Head Mixers
- 100% Dishwasher Safe
- Hand Polished
- Fits Artisan, Classic, KSM150, K45SS, KSM100, KSM75, KSM90 and Many More
- WEIGHT: 426 grams- MATERIAL: 18/8 Stainless Steel
- WIDTH: 13.5cm
- HEIGHT: 15.3cm
- DEPTH (of attachment hub): 3.5cm
- DEPTH (of beater): 1cm
- DISHWASHER SAFE: Yes
EASY TO CLEAN, DISHWASHER SAFE - Made from Premium Stainless Steel, the KA Beater is 100% dishwasher safe, meaning no more tarnished metal or worse - flaked plastic.
HAND POLISHED TO A MIRROR FINISHED - Every KA Beater for Kitchenaid Mixers is hand polished to our extremely high standards to ensure that this is the last beater you'll ever need to buy.
TEMPERATURE MAINTAINED - The Stainless Steel design ensures temperature is maintained at all times so you are free to cool or heat the beater as necessary.
EFFICIENCY BAKED IN - The increased weight and durability of the KA Beater makes for an increase in efficiency which each rotation, designed to mix ingredients fast!
100% FOOD SAFE - The smooth Stainless Steel surface ensures no metal taste contamination with your food, something current beaters suffer from due to their materials and manufacturing processes.
Made to the highest standards
The Tilt-Head Beater has been designed as a quality product to enhance your baking with your mixer.
Using the highest quality materials
It is made from Premium Stainless Steel and is hand polished. The Stainless Steel material makes it long lasting and durable.
Built to stay looking great
It is 100% dishwasher safe, making it easy to use and look after.
WEIGHT: 426 grams
WIDTH: 13.5 cm
HEIGHT: 15.3 cm
DEPTH (OF ATTACHMENT HUB): 3.5 cm
DEPTH (OF BEATER): 1 cm
MATERIAL: 18/8 Stainless Steel
DISHWASHER SAFE: Yes
Head Height Adjustment
To ensure that you are using your Tilt Head Beater at its best, use this simple guide to adjust the head height on your tilt head mixer.
Check how your beater is connecting with the bottom of the bowl. To do this you will need a flat head screwdriver and a coin.
Place the coin in the base of the bowl. Turn your mixer on. If the coin touches the beater and you can hear it, the beater is set too low. If, however, your beater is not touching the coin, then you will need to lower the height of your beater, as it is set too high.
Turn off the mixer, lift the mixer head and remove the beater, where you will see the adjusting screw.
Using the screwdriver, turn the adjusting screw anti-clockwise slowly, this will raise the head of the beater. Turn the screw 1/2 turn at a time, until the beater touches the coin at the base.
The mixer can be adjusted approx. 30mm in height. Each full anti-clockwise turn will raise the head approx. 4.5mm. Turn clockwise to lower the head by the same distance.